RISK RT101 Titanium Bolt Kit for Shimano Deore XT M775 Hydraulic Brake Levers, 20-Piece Set for Front and Rear Levers

RISK RT101 Titanium Bolt Kit for Shimano Deore XT M775 Hydraulic Brake Levers, 20-Piece Set for Front and Rear Levers

The RISK RT101 Titanium Bolt Kit is a dedicated 20-piece fastener upgrade set designed for Shimano Deore XT M775 hydraulic disc brake lever (master cylinder). Machined from premium TC4 (Ti-6Al-4V) titanium and finished with durable PVD coating, this kit replaces every visible steel bolt on the brake lever — including the handlebar clamp bolts, Free Stroke adjuster screws, reservoir cap bolts and washers, and the master cylinder cover panel screws. Weighing only approx. 10.8g for the full set, these titanium bolts reduce unsprung weight while adding a clean, custom look to your brake levers. Every bolt head carries a laser-engraved RISK logo, and the kit arrives in a precision-cut EVA foam-lined metal gift box. Available in Rainbow, Gold, Black, and Raw Titanium finishes.

— Key Advantages —

• TC4 Titanium (Ti-6Al-4V) — high strength-to-weight ratio, corrosion-resistant, and significantly lighter than the stock steel bolts
• 20-piece complete set — one kit covers both left and right brake levers (one bike / one pair), including clamp, reservoir cap, panel, and Free Stroke screws
• Ultra-lightweight — full set weighs only approx. 10.8g (net), reducing weight at the handlebar for a more responsive feel
• PVD coated finish — durable, scratch-resistant coloring in Rainbow, Gold, and Black; Raw Titanium option available for a natural look
• Laser-engraved RISK logo — clean, consistent branding on every bolt head; each bolt is manually inspected before packaging
• Precision machined threads — exact OEM sizing for a perfect fit; no cross-threading or loose fits
• Washers included — reservoir cap washers are included for a complete replacement
• Premium metal gift box — EVA foam-lined tin box (approx. 9 × 6 × 2 cm) keeps all 20 pieces organized and protected; ideal for gifting or resale

— Compatible Products —

Designed specifically for the for Shimano Deore XT M775 hydraulic disc brake lever (master cylinder ). The kit covers the following locations:

Total: 20 pieces — sufficient for one pair of brake levers (front + rear, one bike).

— Notes —

• Brake levers are NOT included — this listing is for the titanium bolts only; brake levers, calipers, and hoses in photos are for display only
• Designed for XT M775 specifically — this kit is sized for Shimano Deore XT M775 brake lever. It may not fit other for Shimano brake models (e.g. M785, M8000, SLX, Deore). Compare each bolt against your original hardware before installing
• Follow torque values strictly — titanium is softer than steel; over-tightening can strip threads or snap bolts, especially on the small 2mm reservoir cap and panel screws. Always use a torque wrench
• Do NOT force installation — if a bolt does not thread in smoothly, stop and re-check the size and thread pitch. Forced installation may damage both the bolt and the brake lever body, and such damage is not covered under warranty
• Be careful with reservoir cap screws — these are small and easy to strip. Ensure the hex key is fully seated and apply even pressure. Do not overtighten — the reservoir cap only needs to be snug (1.5–2 N·m)
• Use anti-seize compound (recommended) — apply a very small amount of copper or titanium anti-seize to threads to prevent galling and seizing, especially on the aluminum brake lever body
• Use quality hex keys — worn or cheap 2mm hex keys can easily round out these small bolt heads. Invest in a quality set
• Color variation — PVD coating colors may appear slightly different under different lighting conditions; minor color variation is normal and not considered a defect
• Manual measurement: weight and dimensions may vary slightly due to hand-measuring and machining tolerances

— Specifications —

Available Options

Each row below is one available option combination. Choose the complete combination that matches your setup.