GUB Aluminum Bicycle Computer Mount for Integrated Road Handlebars with Garmin Bryton and CatEye Adapters and GoPro Camera Mount Interface

Forward computer mount for integrated handlebars

This GUB aluminum bicycle computer mount attaches beneath compatible integrated road handlebars using the two elongated mounting slots. It positions a compatible computer ahead of the bar and provides an underslung camera mounting interface. Check the handlebar mounting-hole pattern, screw requirements and available clearance before purchase.

Interchangeable computer adapters

The illustrated kit includes inserts or adapters for Garmin-style, Bryton-style and CatEye-style computer mounting interfaces. Fit the insert that matches the actual device and check that it locks securely. Brand compatibility depends on the device mounting interface; it does not establish fit for every model sold under each brand.

Camera and optional light position

The included lower adapter provides a GoPro-style action-camera interface. Source photographs also demonstrate an underslung bicycle light, but the light bracket must be purchased separately. Computers, action cameras and lights are demonstration equipment and are not included with the mount.

Aluminum body and reference measurements

The detail table lists an aluminum-alloy body measuring approximately 144 x 37 x 5mm. The diagram shows two slots approximately 24mm long and a combined slotted region approximately 50mm long. Other arrowed dimensions identify the narrow tail and lower mount. The listed 36g applies only to the body with Garmin insert and camera adapter, rather than every loose part in the kit.

Included hardware

One mount body, Garmin-style computer insert, Bryton-style computer insert, CatEye-style computer adapter and GoPro-style camera adapter are pictured. Hardware comprises two M 3x 10 screws, three M 5x 18 screws and two M 5x 10x 0.8 washers. Verify the screws are suitable for the handlebar before installation.

Installation and final fit check

Align the mount slots with the handlebar mounting points, install suitable hardware and tighten in accordance with the handlebar manufacturer instructions. Check device engagement, steering clearance and accessory retention before riding. A hex tool is needed; no installation torque value is specified in the source.