GUB Aluminum Bicycle Flat Pedal Pairs with Three Bearings, Grip Pins and Steel Axles, Threaded or Single and Double Quick Release Options

Aluminum bicycle platform pedal pairs

These GUB bicycle flat pedals combine an open aluminum alloy platform, a chromium-molybdenum steel axle and three-bearing construction. Choose a regular threaded pair, a pair with a removable left pedal and threaded right pedal, or a pair with quick-release interfaces on both sides. These are flat platform pedals for ordinary shoes; no clipless cleat mechanism is shown.

Three mounting configurations

The regular threaded version has a conventional axle on both pedals. The single quick-release option specifically combines a quick-release left pedal with a threaded right pedal. The double quick-release option has removable interfaces on both pedals. The original option photographs show the actual collar arrangement for each configuration; the single quick-release selection is still a pair of pedals.

Platform, pins and bearing construction

The platform has an open cut-out layout with five raised grip pins on each face, for ten pins per pedal in total. Physical L and R markings distinguish the two sides. Source construction images show the steel axle, sealing ring, three bearings, washer, nut and end cap. The removable version adds a separate quick-release adapter and retaining collar.

Dimensions and crank compatibility

The threaded pair is shown with an approximately 110 mm overall height,84 mm width,75 mm platform body height and 20 mm body thickness. The quick-release version is shown with an approximately 112 x 84 mm overall profile and 75 mm body height. The supplier labels the nominal threaded diameter as 14 mm. Compare the actual pedal thread and crank specification before purchase; this nominal dimension alone does not establish every thread pitch or crank fit.

Color and configuration selection

The threaded options are Silver, Black, Red, Gold, Blue, Avocado Green, Purple, Orange, Pink, Turquoise and Rose Red. Left-quick-release/right-threaded and double-quick-release pairs are offered in Silver, Purple and Black. Select both the mounting arrangement and finish from the option label; the supplied version follows its matching pair photograph.

Pair weights and packaging

The source specifies approximate net pair weights of 295 g for regular threaded pedals,320 g for the single quick-release pair and 341 g for the double quick-release pair. These values describe both pedals together and are separate from shipping weight. Packaging reference images show an approximately 205 x 130 x 30 mm box for the threaded version and 203 x 130 x 30 mm for the quick-release version.

Quick-release installation reference

The photo sequence shows separating the pedal from its adapter by lifting the collar, placing the washer on the adapter, fitting the adapter to the crank and tightening with the illustrated wrench. Align the collar opening to insert the pedal, then rotate the collar 180 degrees as shown. Check that the pedal is fully retained before use and follow the correct L/R thread direction. No installation torque is supplied in the source.

Supplied items and product views

Each option is one selected pedal pair. The quick-release package reference also shows an installation wrench, two washers, two rubber rings, an instruction sheet and a factory inspection card. The threaded reference illustrates a 6 mm hex installation key. Accessories are shown for their corresponding version. The bicycle, crank, shoe and demonstration equipment in the installed photos and video are not included.