GUB Aluminum Bicycle Computer Mount with Adjustable Viewing Angle, Stem Top Cap Installation and Four Adapter Inserts for Cycling Navigation

Adjustable bicycle computer mounting above the stem

This black GUB bicycle computer mount positions the selected computer above the stem and steerer top-cap area. The aluminum alloy body has a pivot joint that allows the viewing angle to be adjusted. Front, side and installed photographs show the actual mount position and the clearance around the stem.

Four computer insert interfaces

The included-parts panel shows separate inserts identified for Garmin, Cateye, Bryton and Wahoo mounting interfaces. Use the insert corresponding to the actual connection on the computer. The photographs illustrate the interface shapes; compatibility depends on that mechanical interface rather than the brand name alone. Computers shown in the examples are not supplied.

Aluminum body and pivot joint

The source parameter table identifies an aluminum alloy body. Close-up views show the mounting hole, pivot fastener, raised computer interface and GUB marking. The angle illustration demonstrates adjustment at the pivot, without specifying a numerical angular range.

Stem and steerer top-cap installation overview

The source installation sequence shows the mount installed at the stem and steerer top-cap location, followed by angle adjustment and fitting the computer. Compare the actual headset, top-cap fastener and available clearance with the illustrated arrangement. The demonstration video notes that a hex key is not included. The source does not provide torque specifications in the pictured sequence.

Hardware and adapter contents

The included-parts photograph identifies oneM 6 x 35 mm bolt, oneM 5 x 17 mm bolt, a washer and twoM 3 x 3 mm screws, together with four computer inserts. Two additional parts are labeled as an action-camera base and connector. Their actual shapes and attachment points are retained in the parts photograph. A cycling computer, camera, light, bicycle and hex key are not included.

Approximate dimensions and weight

The product dimension diagram shows approximately 36 mm width and 37 mm height in the illustrated orientation. The source gives approximately 34 g net weight and 54 g gross weight. The retail-package diagram separately shows approximately 95 x 128 mm; those package dimensions are not the mount dimensions. One black mount and the pictured adapter/hardware kit are supplied.