GIYO Wireless Remote Bicycle Front Light with 1600 Lumen Maximum Output, 5000mAh USB-C Charging and Rotatable Lens for Upright or Underslung Mounting

Wireless-remote bicycle front light

This silver GIYO bicycle front light combines an aluminum-alloy body with a wireless handlebar remote. The source lists a maximum combined-beam output of 1600 lumens, an internal 5000mAh 3.7V battery and a rotatable beam lens. Use the remote to change the output or beam selection while maintaining a normal grip on the handlebar.

Rotatable lens for upright or underslung installation

The lens can be rotated to orient the beam for upright or underslung mounting. The product photos show both positions and the lens alignment. Check that the mount and light are secure and aim the beam appropriately. The bike computer and out-front adapter shown in some installation examples are separate demonstration accessories.

Five regular settings and maximum combined-beam output

The runtime chart separates combined-beam maximum output from the five regular single-beam settings. Maximum combined output is rated 1600 lumens for approximately 2 hours. Regular settings are High 800 lumens for 3 hours 40 minutes; Medium 400 lumens for 7 hours; Low 200 lumens for 13 hours; Slow Flash 0-400 lumens for 13 hours 30 minutes; and Fast Flash 0-400 lumens for 13 hours 30 minutes. Actual runtime varies with use and battery condition.

Remote buttons and pairing

Hold the remote center power button for approximately 0.5 seconds to switch power, or short-press it while the light is on for maximum output. The upper remote button changes brightness; the lower button changes near, far and combined beam selection. To pair, turn the light on, press its main button three times quickly until the indicator is green, then press any remote button. The green indicator goes out when paired.

USB-C charging and battery-level display

The source specifies USB-C charging with a 5V 2A input and an included charging cable. With the light off, pressing the main button displays the battery level: green above 80%, blue between 30% and 80%, and red below 30%. Close the charging-port cover securely after charging.

Button lock for storage

To unlock, press the main button five times quickly; the green indicator confirms unlocking, then hold the button to power on. To lock, first hold the button to turn the light off, then press it five times quickly. A flashing red indicator confirms the locked state. This control lock helps avoid unintended activation during storage.

Dimensions, construction and weather rating

The light body is approximately 114mm long and 28mm in diameter. The product information lists aluminum alloy, PC and ABS construction and approximately 149g net product weight. The stated IP 66 rating is intended for dust and water resistance in riding conditions. Keep the charging cover closed and follow the supplied care instructions.

Included kit and mounting checks

The selected option is the silver light with wireless remote and pictured handlebar mounting bracket. The source also states that a charging cable is included. Bicycles, bike computers and separate out-front adapters shown in demonstrations are not included. Confirm mounting clearance and beam orientation before riding.