ERGON GP2 GP3 Large Ergonomic Bicycle Grip Pairs with Textured Palm Support and Adjustable Bar Ends for Flat Bar Touring and Commuter Bikes

Ergonomic bicycle grip pairs with bar ends

ERGON GP2 and GP3 Large grips combine a broad textured palm-support surface with an adjustable outer bar end. These black and gray grip pairs provide a main grip position and a separate bar-end hand position for suitable flat-bar commuting, touring and mountain bicycles. Choose the GP2 or GP3 model from its matching option photograph.

Choose GP2 or GP3 Large

GP2 uses the shorter curved bar end shown in its dedicated photos; the source dimension panel gives approximately 140 mm grip length and 90 mm bar-end length. GP3 uses the longer three-finger bar end shown in the GP3 photographs, with approximately 140 mm grip length and 100 mm bar-end length. Both offered options are Large size, supplied as a left/right pair.

Palm support, texture and angle adjustment

The widened lower portion supports the palm over a larger contact surface than a narrow cylindrical grip. Gray diamond-pattern rubber covers the palm area, with a textured black surface around the remaining grip. The bar end can rotate relative to the grip, allowing the grip and bar-end angles to be set separately. Reference marks are shown near the clamp.

Handlebar fit and sizing

The GP2 detail panel specifies a 22.2 mm handlebar diameter. Compare the actual grip interface and available straight handlebar length before fitting either option. The Large size reference gives an approximately 8.5-10.4 cm palm-width range. Check clearance around brake levers, shifters and other controls; the reference photos show several installed arrangements rather than universal compatibility.

Materials, clamp and end plugs

The source illustrates rubber grip bodies, a composite GP3 bar end and a metal clamping interface. The outer hex-bolt clamp secures the assembly, and the exploded views show the separate bar end, grip and dust plug. Visible mold lines and trimming marks are documented in the source rubber closeups. Retain the supplied instructions for the selected model.

Installation reference

Check the available handlebar space and control positions, slide on the grip, position the bar end fully on the handlebar, fit the end plug and tighten according to the supplied instructions and actual component markings. The GP3 reference illustrates an approximately 10 mm allowance during positioning and a 4 mm hex key. Adjust the grip and bar-end angles for your fit, then verify that both are secure before riding.

Pair weights and supplied format

The supplier detail images give approximate net pair weights of 238 g for GP2 and 360 g for GP3. These describe the grip pair rather than shipping weight. Both actual purchase options specify bag packaging with an instruction sheet. Each selection supplies one chosen left/right grip pair; bicycles, brake controls, watches and demonstration tools are not included.

Photographs and model differences

The dedicated photos and option images identify GP2 and GP3 by their physical model markings and bar-end shapes. The video shows the GP3 grip, clamp adjustment and hand positions. GP1 and GP5 in general supplier comparisons are different products and are not options in this listing. Select the exact GP2 or GP3 Large option when ordering.