CXWXC Digital Bicycle Shock Pump with LCD Pressure Gauge, 300 PSI Maximum, Air Bleed Button and Rotating Hose for Suspension Forks and Rear Shocks

Portable digital-gauge suspension pump

This CXWXC manual pump combines an aluminum-alloy barrel, a digital pressure gauge and a flexible hose for compatible suspension forks, rear shocks and bicycle tires. The stated maximum pump pressure is 300PSI. The black body, connector and blue-and-black gauge-face artwork are shown in the actual product photographs.

LCD pressure display with four units

The LCD shows pressure in psi,bar,kg/cm 2 or kPa. Hold the gauge button for approximately 2 seconds to switch the display on or off, and short-press it to cycle through the pressure units. Select the unit specified by the suspension or tire manufacturer before setting the target pressure.

Air bleed button and controlled adjustment

A separate red air-bleed button is positioned below the gauge assembly for releasing air during adjustment. Inflate and adjust according to the fork, shock or tire manufacturer instructions. The 300PSI figure is the pump maximum and should not be treated as the correct pressure for every component.

Schrader and Presta connection choices

The source illustrates a convertible metal connector for Schrader and Presta valves. The hose connection can rotate to provide access around the bicycle frame or fork. Check the actual valve and follow the connector conversion instructions before attaching the pump; the installation photos show the two connector configurations.

Dimensions and carrying detail

The stowed pump length is approximately 29.5cm, extending to approximately 47.5cm with an 18cm pumping stroke. The illustrated hose is approximately 26.5cm long and the base width approximately 6.5cm. The source lists a net product weight of approximately 130g. A clip holds the hose beside the barrel for storage.

Handle, construction and battery type

The T-shaped handle provides a grip for manual pumping. The product table lists aluminum alloy and nylon construction. The digital gauge uses a replaceableCR 2032 battery, with the compartment shown on the back of the display. Follow the supplied instructions when replacing the battery.

Included pump and demonstration items

One CXWXC digital-gauge pump with its pictured attached hose and connector is supplied. The folded and extended photographs are two views of the same pump. Bicycles, wheels, forks and rear shocks in demonstration photographs are not included. Check the connection, selected pressure unit and required component pressure before use.