BARADINE Dual-Compound Bicycle V-Brake Pad Pair with 72mm Molded Shoes, Threaded Mounting Posts and Water-Clearing Grooves for Rim Brakes

Dual-compound rim-brake shoes for V-brakes

This BARADINE brake-pad pair uses a molded shoe design with two visible rubber sections: black plus the selected red, blue or green section. The source identifies it for V-brake rim-brake systems and lists an approximate 72mm shoe length. Choose the required color combination; one pair of two brake shoes is supplied.

Grooved braking surfaces for varied riding conditions

The source describes the dual-section design for all-weather use, with molded grooves intended to help clear water and debris from the rim contact area. The colored and black rubber sections form the same shoe. Check the brake pads and braking surface regularly, because wear, rim condition and adjustment affect braking performance.

Three color combinations

Available options are Red and Black, Blue and Black, and Green and Black. The source lists the same price, length and approximate pair weight for these three options. The color menu changes the pad appearance; it does not select a different brake system or mounting standard.

Threaded posts and the pictured mounting hardware

Each shoe has a threaded mounting post with the hardware shown in the product photographs. Check that the brake arms and mounting arrangement suit the shoes before fitting. Keep the washers and spacers in the order required by the brake manufacturer and follow its installation and adjustment instructions.

Orientation and rim alignment

Use the molded L/R and direction markings on the actual shoes, together with the brake manufacturer instructions. Align the braking surface with the rim braking track so the pad does not contact the tire. Check clearance, secure mounting and brake operation before riding. Select pads that meet the requirements of the rim braking surface.

Approximate length and pair weight

The product information states approximately 7.2cm, equivalent to 72mm, in length and approximately 68g net for one pair. These values describe the two-shoe product rather than a complete front-and-rear brake set. One bicycle with pads needed at both wheels normally requires separate pairs appropriate to each brake.

Included pair and packaging views

One selected-color pair of BARADINE brake shoes with the pictured mounting hardware is included. Photos of loose pads beside a packaged pair show the product and its packaging rather than two pairs supplied together. Bicycles, brake arms, wheels and installation tools are not included.